What Is Plasma Booster?

Plasma Booster is a high power amplifier which enhances combustion efficiency by drastically increasing the secondary current and providing multiple sparks in a unique way. All our products are made in Japan with high quality, reliability and safety unrivaled in the industry. Plasma Booster is also OBD II (On-Board-Diagnostics) compliant. Installation is easy. Simply wiring at the original ignition coil and you are all set for tuning!

Product Features

Plasma Booster lets a spark ignite more than three times at ultrafast speeds during one combustion process and also supercharges the sparks up to the highest RPM without damaging ignition plugs.

The secondary current (amperage) can be approximately double that of stock coils, which lowers the risk of detonation or preignition due to incomplete combustion.

The effect obtained by the above mentioned upgrade leads to more horsepower and torque throughout the entire RPM range.

Plasma Booster is made to a specific application. Please check the Application Chart below to find the correct model for your vehicle.

Operation Analysis by Oscilloscope

Double the Amperage for the Initial Spark Discharge

High efficiency combustion can be created by perfect growth of the flame core.

[Stock coil]

[Plasma Booster]

"Multi Spark" (Multiple Ignition) Provision

Additionally, ignition performance sees futher gains by generating the sparks at a microsecond rate.

[Stock coil]

[Plasma Booster]

Noise Removal

To constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminated.

[Stock coil]

[Plasma Booster]


Power/Torque Increment

Quick Responce

Stable Startability

Engine Throb Decrement

Smooth Boost Pressure


LED Loaded (TYPE A/B)

Fail-Soft Function

Easy Wiring

Quack/Water Resistant

Power Check by a Chassis Dynamometer

Plasma Booster operates throughout the entire RPM range. *The results depend on an operational environment.

Combustion Images

[Stock coil]

[Plasma Booster]

Examples of Installation





How to Install (For Transistor Ignition Type Engine)

1. Connect the Plasma Booster colored-wire to the negative coil (for CDI ignition type engine, it connects to the positive coil) using the quick connector.

2. Connect the Ground Lug to the Plasma Booster black wire. Use either the 6mm or 8mm, according to the hole size of the grounded object.

3. Ground the Plasma Booster black wire to a suitable Engine Ground.

Plasma Booster Model Lineup

Type-A for Cars

Ignition Type Transistor Ignition
Number of Available Ignition Coils 6 - 8

Type-B for Cars and Motorcycles

Ignition TypeTransistor Ignition
Number of Available Ignition Coils 1 - 4

Type-E for Motorcycles

Ignition TypeTransistor Ignition
Number of Available Ignition Coils 1

Type-CDI for Motorcycles

Ignition TypeCDI Ignition
Number of Available Ignition Coils 1

*This product cannot be installed on non-genuine ignition coils or other coils which have an igniter built‐in.



2-3-5 Kitamikata, Takatsu-ku, Kawasaki-shi, Kanagawa 213-0005 Japan